Measuring Tools, Craftsmen's: PWA26319, PWA32162, PWA43042
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PWA26319 | 5210-00-283-2786 | Gage, gap Setting | United Technologies Corporation (77445) | ||
| PWA29646 | 5210-01-392-1696 | Gage, Thickness, Dial Indicating | General Characteristics Item Description: Rqrd to inspect and verify that specified radii for various compressor and turbine vanes have been obtained;c/O steel block body W/attached dial indicator, holder and micrometer head;storage container INCLUDED;4.8 in. lg BY4.5 in. wd by 0.8 in. HT;1LB;SERD 0002 | United Technologies Corporation (77445) | |
| PWA29875 | 5210-01-256-4411 | Gage, Thickness | Special Features: Fitem is feeler gage providing A measurement between the tip of the fan blade assembly and fan case rubstrips; gage is 7.2 in. X .5 in. X .4 in., weighs 0.1 pound, made of steel with black oxide finish END Item Identification: C17 acft | United Technologies Corporation (77445) | |
| PWA30188 | 5210-00-220-2482 | Gage, Special | United Technologies Corporation (77445) | ||
| PWA30254 | 5210-00-205-8516 | Gage, Angle | Special Features: 5.500 by 0.625 in. Part Name Assigned BY Controlling Agency: Gage assembly, vane angle check | United Technologies Corporation (77445) | |
| PWA31119 | 5210-01-187-4131 | Gage, Angle | Special Features: First stage tubine vane classification/twist check END Item Identification: TF-33 eng Part Name Assigned BY Controlling Agency: Gage, symmetrical angle | United Technologies Corporation (77445) | |
| PWA312-11 PWA31211 | 5210-00-142-7061 | Indicator, Dial | Graduation Unit: 0.00500 inches Dial Marking: 0-25-0 Measurement Capacity: 0.125 inches | United Technologies Corporation (77445) | |
| PWA31603 | 5210-01-049-8541 | Gage, Depth, Dial Indicating | Special Features: Box assembly END Item Identification: TF33 turbofan engine Gaging Range: +0.025/+0.150 inches | United Technologies Corporation (77445) | |
| PWA32162 | 5210-01-116-6858 | Gage Assembly, Surface | General Characteristics Item Description: Body, steel aisi 1019 or 1020, 4.250 in. outside dia, wall 0.500 in., 3.63 in. lg; plate, steel, 9.250 in. outside dia, 0.375 in. thk, inside dia 4.250 in. dia slip fit over body to 1.750 in. from end; 16 dial indicators, model B71-C, continuous dial, equally spaced and located within 0.005 in. of true position and square with surface; body fastened to plate with 4 hex head screws Y4-20, 3.250 in. lng, 0.250-2OUNC-2B tap, equally spaced and located 0.0625 of true position; box 15.500 in. lng, 9.500 in. hg, 13.500 in. wide, pine, standard 1.000 in. stock, shellac finish | United Technologies Corporation (52661,77445) | |
| PWA32163 | 5210-01-116-7000 | Rod, End Measuring, Standard | Special Features: With flexible tube, celluplastic, 0.375 in. dia, 13.500 in. lg, wall 0.031 in. thk, both ends identical, closure plastic plug 0.375 in. dia Length: 12.522 inches minimum and 12.542 inches maximum Diameter: 0.060 inches minimum and 0.064 inches maximum | United Technologies Corporation (52661,77445) | |
| PWA37020 | 5210-00-205-8502 | Gage, Marking | United Technologies Corporation (77445) | ||
| PWA37035 | 5210-00-599-4042 | Gage, Cylinder | Special Features: Gage, cylinder-heat SHIELD;7.500 in. lg | United Technologies Corporation (77445) | |
| PWA37138 | 5210-00-599-4040 | Gage, Depth, Dial Indicating | Special Features: Gage, dial BORE;6.000 in. lg | United Technologies Corporation (77445) | |
| PWA37188 | 5210-00-509-2305 | Gage, Wheel Alignment | United Technologies Corporation (77445) | ||
| PWA37378 | 5210-01-027-5547 | Gage, Height | United Technologies Corporation (77445) | ||
| PWA37502 | 5210-01-006-1541 | Gage, Indicating, Internal | Special Features: Gage, indicator, retaining plate;steel, C-O box 1, locating ball 2, holder 1, pin 2, block 1, indicator 1 END Item Identification: Aircraft engine TF30&P&100 | United Technologies Corporation (77445) | |
| PWA37584 | 5210-01-060-5431 | Gage, Calibrating | United Technologies Corporation (77445) | ||
| PWA37679 | 5210-01-027-5549 | Gage, Height | United Technologies Corporation (77445) | ||
| PWA38025 | 5210-01-071-0916 | Caliper, Gear Tooth, Vernier | United Technologies Corporation (77445) | ||
| PWA43042 | 5210-01-096-4834 | Indicator, Dial | Special Features: Gage, outside peaking-outer comb chamber;case axial weld;consists of 1 block, matl AISI4140;1BODY, matl aisi 4140;1 point, matl steel, mfr 21938 P/N PT253;4 tooling buttons, matl carbide, mfr 62128 P/N 62619;2 legs, matl aisi 1018;1 socket set scr, matl sst, mfr 96906 P/N MS18066-19;4 dowel pins, matlsst, mfr 96906 P/N MS16555-627;1 handle, matl aisi 1018;1 dial indicator-mfr 21938 P/N B 71;1 arm-matl aisi 4140; 2SOCKET hd cap screw, matl sst-mfr 96906P/N MS16995-38;1 bushing-matl steel- mfr 21938 P/N bu 80; 4 socket hd cap screw, matl sst-mfr 96906 P/N MS16697- 37;1 box assy, matl plastic;used on J57ENGINE | United Technologies Corporation (77445) |