Measuring Tools, Craftsmen's: G704-ENV, G732, GA438A
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| G704-ENV G704ENV | 5210-01-513-6770 | Gage, Indicating, Internal | Part Name Assigned BY Controlling Agency: Inspection gage | Daniels Manufacturing Corporation (11851) | |
| G732 | 5210-01-513-6772 | Gage, Indicating, Internal | Part Name Assigned BY Controlling Agency: Inspection gage | Daniels Manufacturing Corporation (11851) Glenair UK LTD (U0419) | |
| G732-ENV G732ENV | 5210-01-513-6772 | Gage, Indicating, Internal | Part Name Assigned BY Controlling Agency: Inspection gage | Daniels Manufacturing Corporation (11851) | |
| G752 | 5210-01-541-8745 | Gage, Calibration Fixture | Daniels Manufacturing Corporation (11851) | ||
| GA1000 | 5210-01-314-7581 | Caliper, Micrometer, Outside | Special Features: Digital readout Gaging Range: +0.000/+1.000 inches Ratchet Stop: Included | Idsc Holdings LLC (55719) | |
| GA1000M | 5210-01-460-7637 | Caliper, Micrometer, Outside | Gaging Range: +0.0/+25.0 millimeters Ratchet Stop: Included Graduation Unit: Thousandths of A millimeter | Idsc Holdings LLC (55719) | |
| GA-190 GA190 | 5210-00-357-5951 | Gage, Depth, Tire Tread | Special Features: Dual 3 sides calibrated in 1/32IN., zero to 1 in. and 3 sides calibrated in mm; plated pocket clip; carded; standard 10 per box Supplementary Features: Determines the amount of tread left on tires | Schrader-Bridgeport Intl Inc. (94113) | |
| GA2A | 5210-01-335-1608 | Rule, Machinist's | Material: Steel Width: 0.750 inches nominal Reading Direction: Right | Idsc Holdings LLC (55719) | |
| GA2B | 5210-01-335-1608 | Rule, Machinist's | Material: Steel Width: 0.750 inches nominal Reading Direction: Right | Idsc Holdings LLC (55719) | |
| GA3400 | 5210-01-540-5155 | Indicator, Dial | Special Features: Test indicator; includes two extra contacts (3/16 and 5/16 in. dia), indicator holding rod, hole attachment for checking bore (0.125 in. range), indicator C-clamp mounting and universal rod connector and tool post holder Graduation Unit: 0.00100 inches Dial Marking: 0-100 | Idsc Holdings LLC (55719) | |
| GA3460 | 5210-01-583-9368 | Indicator, Dial | Special Features: Measures gear backlash, run out, axle end play, pinion depth, end play and carrier assembly; reading 0-50; graduations 0.0005 in. Part Name Assigned BY Controlling Agency: Set, master rear axle Measurement Capacity: 1.000 inches | Idsc Holdings LLC (55719) | |
| GA3640 | 5210-01-525-5712 | Indicator, Dial | Special Features: Test indicator; includes magnetic base with post, stepped rod and clamps, contact, rod connector and indicator holding clamp Graduation Unit: 0.00050 inches Dial Marking: 0-50 | Idsc Holdings LLC (55719) | |
| GA3707 | 5210-01-113-8074 | Gage set, Timing | General Characteristics Item Description: Contains dial indicator with 0 to 1 in. range, 0.001 in. graduations; includes 4 and 7-1/2 in. posts; hinged support arm; offset contact point; used to set injector timing | Idsc Holdings LLC (55719) | |
| GA427 | 5210-01-437-1702 | Tape, Measuring | Width: 0.500 inches nominal Inclosure Type: CASE Design Type: General purpose distance measuring | ||
| GA427A | 5210-01-437-1702 | Tape, Measuring | Width: 0.500 inches nominal Inclosure Type: CASE Design Type: General purpose distance measuring | Idsc Holdings LLC (55719) | |
| GA429 | 5210-01-430-3093 | Tape, Measuring | Special Features: Yellow blade; stud markings every 16 in.; round vinyl covered steel case Design Type: General purpose distance measuring Material: Steel | Idsc Holdings LLC (55719) | |
| GA429A | 5210-01-430-3093 | Tape, Measuring | Special Features: Yellow blade; stud markings every 16 in.; round vinyl covered steel case Design Type: General purpose distance measuring Material: Steel | Idsc Holdings LLC (55719) | |
| GA435 | 5210-01-598-7502 | Straightedge | Special Features: Calibrated to be flat within 0.0002 in. (0.005 mm) per running foot length; use with feeler gauges to check for distortion in engine blocks, cylinder heads, flywheels, main bearing saddles, cam bearing housings; with hang hole and edge protector Length: 18.000 inches nominal Thickness: 0.250 inches nominal | Idsc Holdings LLC (55719) | |
| GA438 | 5210-01-437-1709 | Straightedge | Thickness: 0.250 inches nominal Length: 24.000 inches nominal Unit Type: Straight four edges | Idsc Holdings LLC (55719) | |
| GA438A | 5210-01-437-1709 | Straightedge | Thickness: 0.250 inches nominal Length: 24.000 inches nominal Unit Type: Straight four edges | Idsc Holdings LLC (55719) |