Measuring Tools, Craftsmen's: 1018, 1019, 10300821
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 1018 | 5210-00-790-2519 | Caliper, Micrometer, Outside | Gaging Range: +0.000/+18.000 inches Ratchet Stop: Not included Graduation Unit: Ten-thousandths of an inch | J.T. Slocomb Corp. (55282) | |
| 1019 | 5210-00-790-2520 | Caliper, Micrometer, Outside | Gaging Range: +18.000/+19.000 inches Ratchet Stop: Not included Graduation Unit: Ten-thousandths of an inch | J.T. Slocomb Corp. (55282) | |
| 101994-E317 101994E317 | 5210-01-476-9432 | Multi-meter, Aircraf | END Item Identification: Test stand, aircraft Criticality Code Justification: AGAV | Testek Inc. (06659) | |
| 101994-IE317 101994IE317 | 5210-01-476-9432 | Multi-meter, Aircraf | END Item Identification: Test stand, aircraft Criticality Code Justification: AGAV | Testek Inc. (06659) | |
| 101997-IE401 101997IE401 | 5210-01-476-9669 | Flowmeter, Aircraft, | END Item Identification: Special aircraft and engine tool and support equipment Criticality Code Justification: AGAV | Testek Inc. (06659) | |
| 101D4561 | 5210-00-470-5267 | Gage, Special | END Item Identification: Armament subsystem, XM97E1 | General Dynamics Armament And (05606) | |
| 102 | 5210-01-435-7028 | Caliper, Micrometer, Outside | Special Features: Satin chrome frame and micrometer head; decimal equivalent chart on frame Gaging Range: +0.000/+1.000 inches Ratchet Stop: Not included | General Hardware Mfg Co. Inc. (73792) General Tools Manufacturing Co. LLC (3JKA4) | |
| 1020 | 5210-00-790-2521 | Caliper, Micrometer, Outside | Gaging Range: +0.000/+20.000 inches Ratchet Stop: Not included Graduation Unit: Ten-thousandths of an inch | J.T. Slocomb Corp. (55282) | |
| 102054-1001 1020541001 | 5210-01-327-2387 | Protractor, Mechanics, Plain | Purchase Description Identification: 82106-102054 | Parker-Hannifin Corporation (82106) | |
| 102076 | 5210-00-302-1657 | Level, Antenna Base | Viking Technologies LTD. (71313) | ||
| 1021 | 5210-01-091-1948 | Gage, Surface | Special Features: Analyzer, surface finish;item is for straight line tracing;stylus tip radius 500 porm 100 microinches;stylus force 2.5 grams;tracer head shall be sufficient for rugged heavy duty type tracing work;radius of skids;movement of tracer-is provided withor incorporate A motor driven device, the device shall provide adj. to vary the length of traverse, the length shall be used as follows-measure internal surfaces ranging from 1.82 in. inside dia. to flat surface and to meas. external surfaces ranging from 0.125 in. outside dia. to A flat surface, raover shoulders & across grooes sufficient for shoulder height or groove depth of .25 in. and to within .15625 in. of the shoulder side or groove side, shall measure roughness of balls ranging in dia. from .125 in. to 1.625 in.;shall be operable on 115 volts, 60 H/ac electrical power;wave length long cut-off point corresponding to A roughness of 0.01 in. and 0.1 in.;item identification-P/N M45177-3 | Warner and Swasey Co. (54465) | |
| 102102-00 10210200 | 5210-01-112-2293 | Plumb Bob | Ametek Inc. (97424) Revere Transducers Inc. (23796) | ||
| 1025 | 5210-00-541-4619 | Caliper, Slide | Special Features: 5 in. O/A lg; graduated in 32NDS and 64THS on slide, 32NDS on stock Nondefinitive Spec/STD Data: 4 type Measurement System: English | The L S Starrett Company (57163) | |
| 1025-5 10255 | 5210-00-221-2091 | Caliper, Slide | Measurement System: English Outside Measurement Range: +0.000 to 3.750 inches Inside Measurement Range: +0.250 to 4.000 inches | The L S Starrett Company (57163) | |
| 10,285-2 102852 | 5210-01-005-4495 | Gage, Indicating, Internal | Mechanical Technology Inc. (52226) | ||
| 10286296 | 5210-00-084-3938 | Level, Bench | Special Features: Drill and tap 6-32UNF-2B 2 places Design Type: Single face Material: Iron, cast | U S Army Aviation and Missile (18876) | |
| 102988-C 102988C | 5210-01-025-0398 | Gage, Indicating, Internal | Special Features: Gaging fixture;c/O vernier height gage 1, dial indicator 1 END Item Identification: Awacs E3A | General Motors Corp. (52788) Linear Motion LLC (0A335) | |
| 102 GENERAL TOOL 102GENERALTOOL | 5210-01-435-7028 | Caliper, Micrometer, Outside | Special Features: Satin chrome frame and micrometer head; decimal equivalent chart on frame Gaging Range: +0.000/+1.000 inches Ratchet Stop: Not included | Kipper Tool Company (00NS2) | |
| 102J SD 102JSD | 5210-00-136-1041 | Indicator, Dial | Graduation Unit: 0.00100 inches Dial Marking: 0-100 Measurement Capacity: 0.250 inches | B. C. Ames Incorporated (03249) | |
| 10300821 | 5210-01-543-2777 | Torque Wrench, Aircr | Paeaeesikunta (A486G) |