Inspection Gages and Precision Layout Tools: PWA81241-9, PWA81657-5, PWA81887
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PWA81241-9 PWA812419 | 5220-01-384-2671 | Gage, Profile | Special Features: To check high pressure COMPRESSOR14TH stage stator vane thickness;material is hardened tool steel Gage Type: Combination go not go Design Type: Double end | United Technologies Corporation (77445) | |
| PWA81290 | 5220-01-397-4768 | Gage, Profile | Special Features: Item is A steel rod;one end is A knurled handle;face of other end has counterbore that fits over and bottoms on end of igniter GUIDE;2 notches on rod are visual min/max measurement;storage container provided;serd 2559;RQRD to check axial location of combustion chamber igniter guide END Item Identification: 117 engine | United Technologies Corporation (77445) | |
| PWA81291 | 5220-01-397-6732 | Gage, Profile | Special Features: Knurled HANDLE;10.0IN lg X 2.0IN max od;used to check id clearance envelop of combustion chamber igniter guide while chamber is in repair fixture;end item F117-PW-100;SERD 2560 | United Technologies Corporation (77445) | |
| PWA81329 | 5220-01-386-2882 | Gage, Profile | Special Features: Required to be A standard when measuring the 2ND stage turbine blade growth;serd 1546 END Item Identification: F117-PW-100 Gage Type: Limit | United Technologies Corporation (77445) | |
| PWA81350 | 5220-01-379-7601 | Gage, Profile | Special Features: Fixture, backlash;fixture dimensions 25.30 in. lg by 25.30 in. W by 6.50 in. h;net weight 3.5 lbs;consist of weld support, pilot shaft push-pull force gage, hand knob, threaded extension rod and storage box Supplementary Features: Serd 1240 | United Technologies Corporation (77445) | |
| PWA81363 | 5220-01-386-1250 | Gage, Comparator, Electronic | Special Features: Required to measure sq inch area value of 1ST stage turbine stator vaneassy when using computer enhanced method;gage is steel and carbide constructed W/inner trailing edge, outer leading edge buttress platform, locator pins, supports, convex and concave airfoilprobes, probe lever and computer terminal strip CONNECTOR;8.500IN lth X 6.200IN wide X 6.700IN HEIGHT;25LBS;SERD 1585 END Item Identification: 117 engine | United Technologies Corporation (77445) | |
| PWA81364 | 5220-01-386-1289 | Gage, Comparator, Electronic | Special Features: Matl carbide and steel, precision ground surface, including helical and compound angles, inner and outer buttress locator datums and rear inner flangeradial locator holes;rqrd to facilitate square inch area calibration of computer enhanced open area of first stageturbine vane gage;item is A MASTER;6.3IN. ht by 2.5 in. wd;serd 1586 END Item Identification: 117 engine | United Technologies Corporation (77445) | |
| PWA81365 | 5220-01-386-1296 | Gage, Comparator, Electronic | Special Features: Required to measure sq inch area of 2ND stage non-pair turbine vane assy, 2ND stage welded cluster turbine vane assy, 2ND stage non-welded cluster turbine vane assy when using computer enhanced method;gage is steel and carbide and has inner trailing edge and outer leading edge buttress platform locator and supports, convex and concave air foil probes, probe actuation lever, digital readout device;serd 1587 END Item Identification: 117 engine | United Technologies Corporation (77445) | |
| PWA81366 | 5220-01-386-1240 | Gage, Comparator, Electronic | Special Features: Matl carbide and steel, precision ground surface, including helical and compound angles and inner and outer buttress locator datums W/convex and concave airfoil section DATUMS;4.9 in. lg by 2.2 in. wd by 5.4 in. HT;4 lbs;master is rqrd to facilitate square inch area calibration of computer enhanced area of second stage turbine vane serd 1588 END Item Identification: 117 engine | United Technologies Corporation (77445) | |
| PWA81418 | 5220-01-384-9252 | Gage, Profile | Special Features: Gage, angle, bend; used to check final bend angle, right and left, of the 9TH stage blade locks;gage is clear plastic block W/2 locat ing pins which are tangent to A CURVEDSURFACE;2 deep scribed lines, one sloping down at 75 degrees and the other sloping up at 75 degrees;various numbrand letters inscribed on surface for identification, positioning, and usage; 4.0 in. lg by 3.0 in. wd by 0.9 in. HT0.3 lb;used on 117 engine, serd 1517 | United Technologies Corporation (77445) | |
| PWA81498 | 5220-01-392-8249 | Gage, Profile | Special Features: Gage, length, indicating;used to check blade tip length during grinding oper on 6TH-17TH stage high pressure compressor BLADES;3 in. lg X 2.5 in. high X 0.800 in. wd END Item Identification: F117-PW-100;SERD 1462 | United Technologies Corporation (77445) | |
| PWA81657-1 PWA816571 | 5220-01-384-9057 | Gage, Profile | Special Features: 0.50 in. WD;0.50 in. ht;used W/holder and base to measure 11TH stage blades of high pressure compressor;c/O hardened tool steel BLANK;1.5 lbs END Item Identification: 117 engine Design Type: Single end | United Technologies Corporation (77445) | |
| PWA81657-2 PWA816572 | 5220-01-384-6996 | Gage, Profile | Special Features: 2.000IN high X 0.400IN wide X 0.500IN deep;used with holder and base tomeasure hpc blade lengths | United Technologies Corporation (77445) | |
| PWA81657-3 PWA816573 | 5220-01-383-9912 | Gage, Profile | Special Features: 1.800IN height X 0.600IN wide X 0.500IN deep;used with holder and base to measure the hpc blade lengths | United Technologies Corporation (77445) | |
| PWA81657-4 PWA816574 | 5220-01-384-9791 | Gage, Profile | Special Features: C/O hardened tool steel blank;used with holder and base to measure hpc blade LENGTHS;0.5IN wd X 0.5IN lg X 1.7IN ht END Item Identification: C-17, serd 1259 Design Type: Single end | United Technologies Corporation (77445) | |
| PWA81657-5 PWA816575 | 5220-01-384-0258 | Gage, Profile | Special Features: 1.600IN height X 0.400IN wide by 0.500IN deep;used with holder and baseto measure the hpc blade lengths | United Technologies Corporation (77445) | |
| PWA81657-6 PWA816576 | 5220-01-384-9808 | Gage, Profile | Special Features: C/O hardened tool steel blank;rqrd to gage length of sixteenth stage blades of high pressure compressor;used with holder and BASE;0.4 in. wd by 0.5IN. lg by 1.4 in. ht END Item Identification: C-17, serd 1261 Design Type: Single end | United Technologies Corporation (77445) | |
| PWA81657-7 PWA816577 | 5220-01-384-9065 | Gage, Profile | Special Features: HO.50 in. WD;1.5 in. ht;used with A holder and base to measure 17TH stage blades for high pressure compressor, using master to set up the indicator;c/O hardened tool steel blank with length of 1.431 in. END Item Identification: 117 engine Design Type: Single end | United Technologies Corporation (77445) | |
| PWA81664 | 5220-01-383-9998 | Gage, Profile | Special Features: 2.800IN height X 0.800IN deep X 0.400IN wide;used to set dial indicatorbefore the 10TH stage blade length inspection | United Technologies Corporation (77445) | |
| PWA81887 | 5220-01-393-9164 | Gage, Profile | Special Features: C/O dial indicator holder, master set block, template gage and plastic container;steel master set block allows dial indicator to be adjusted to zero;steel dial indicator holder locates on the gage pads on grind fixture and measures knife edge length;steel template gage locates on gage pads of grind fixture and measures radius run-out;serd 1436;RQRD to check accuracy of grind repairs to the high pressure turbine first stage vane knife edge seal END Item Identification: 117 engine Supplementary Features: Serd 1436 | United Technologies Corporation (77445) |