Inspection Gages and Precision Layout Tools: PWA72232, PWA72245, PWA72546
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PWA72232 | 5220-01-469-7653 | Gage, Disk, Master Setting | Special Features: PWA72232 gage is required to measure the 7TH-9TH stage compressor case outer diameter surface at the bleed hole location during preliminary or finish machining. gage is used with compressor casep/N 4075413 or P/N 4080545 installed in PWA72226 fixture. fixture expanding jaws. gage is preset at 26.000 inches prior to each use by PWA72233 master gage END Item Identification: 6635-01-378-4011; weapon systems designator code 21, freedom fighter F-5 Gaging Surface Outside Diameter: 26.0000 inches | United Technologies Corporation (77445) | |
| PWA72233 | 5220-01-469-7593 | Gage, Disk, Master Setting | Special Features: This gage is required to zero the stage compressor case gage, PWA72232, during pre and final machining of the outer case diameter repair surface END Item Identification: 6630-01-378-4011; weapon systems designator code 21, freedom fighter F-5 Gaging Surface Outside Diameter: 26.0000 inches | United Technologies Corporation (77445) | |
| PWA72234 | 5220-01-467-9593 | Gage, Profile | Special Features: Zchamfer gage consists of flat template constructed of oil hardened aisi 01 steel. template has A lug at each end having A minimum allowable "go" chamfer machined at one end and A maximum allowable "no go" chamfer on the opposite end. | United Technologies Corporation (77445) | |
| PWA72245 | 5220-01-472-4206 | Gage, Disk, Master Setting | Special Features: Rsingle engagement type; gage type is limit; length of engagement: gage ball contact, 2 places, range of id measurement is 21.631-21.651 inches; overall length is 22.650; this master is used to callibrate PWA72237 gage | United Technologies Corporation (77445) | |
| PWA72247 | 5220-01-472-4222 | Gage, Disk, Master Setting | Special Features: Vtype of engagment is single; gage type is limit; length of engagement: gage ball contact, 2 places; range of id measurement is 20.251-20.271 inches; overall length is 21.250 inches; this master is used to callibrate PWA72239 gage | United Technologies Corporation (77445) | |
| PWA72248 | 5220-01-472-4511 | Gage, Disk, Master Setting | Special Features: Vtype of engagment is single; gage type is limit; length of engagement: gage ball contact, 2 places; range of id measurement is 19.849-19.869 inches; overall length is 20.950 inches; this master is used to callibrate PWA72240 gage | United Technologies Corporation (77445) | |
| PWA72269 | 5220-01-467-2169 | Gage, Flush Pin, Plain Cylindrical | Special Features: This nsn is used to check 1.122 - 1.128 dimension during the maching of P/P surface -S- END Item Identification: Weapon system designator code 21, freedom fighter F-5, aircraft, 1730-01-114-4662 | United Technologies Corporation (77445) | |
| PWA72270 | 5220-01-471-5181 | Gage, Profile | Special Features: Small diameter O.D. indicator gage will be used to check the 9.330 - 9.328 diameter at the depth of 0.100. it will be used with PWA72271 setmaster END Item Identification: 6635-01-378-4011; aircraft, freedom fighter F-5 Gage Type: Combination go not go | United Technologies Corporation (77445) | |
| PWA72295 | 5220-01-480-0095 | Gage, Disk, Master Setting | Special Features: Length: 30 inches; pwa 72295 gage master is required to verify PWA72294 gage inner diameter set of 27.070 inches prior to each use END Item Identification: Engine, aircraft, F100 PW220 | United Technologies Corporation (77445) | |
| PWA72297 | 5220-01-486-0307 | Gage, Profile | Special Features: Used for measuring the repairability of 3RD stage (forward end of 26.764), (aft end of 27.514) END Item Identification: F100-PW-229 Supplementary Features: Serd 8917 | United Technologies Corporation (77445) | |
| PWA72302 | 5220-01-470-1408 | Gage, Disk, Master Setting | Special Features: PWA72302 gage master is required to verify PWA72301 gage inner diameter set dimension of 26.932 inches prior to each use END Item Identification: 6635-01-378-4011; weapon systems designator code 21, aircraft, freedom fighter F-5 Gaging Surface Outside Diameter: 26.9320 inches | United Technologies Corporation (77445) | |
| PWA72303 | 5220-01-469-7257 | Gage, Disk, Master Setting | Special Features: PWA72303 gage master is required to verify PWA72343 gage inner diameter of 027.131 inches prior to each use END Item Identification: 6635-01-378-4011; weapon systems designator code 21, aircraft, freedom fighter F-5 Gaging Surface Outside Diameter: 27.1310 inches | United Technologies Corporation (77445) | |
| PWA72325 | 5220-01-486-1328 | Gage, Disk, Master Setting | Special Features: Set master, 1ST stage turbine, stator support, outer;used to check the integrity of PWA72326 fixture prior to finish machine of weld repaired 1ST stage turbine stator outer support lugs END Item Identification: F100-PW-100, 200, 220, 220E Gaging Surface Outside Diameter: 28.6200 inches | United Technologies Corporation (77445) | |
| PWA72368 | 5220-01-485-9575 | Gage, Flush Pin, Plain Cylindrical | Special Features: Gage, flush pin-no 5 bearing seal support, piston ring groove used to assure 0.005 in clean-up dimension does not exceed allowable 1.695 in prior to nickel plate restoration of seal support P/N 4027961; measures depth of lower groove face from an aft datum surface and groove outer diameter; consists of solid rectangular steel block W/ A free moving gage pin with an upper and lower step captured in A hole in the block; storage container END Item Identification: F100-PW-220/220E Supplementary Features: Serd 9006 | United Technologies Corporation (77445) | |
| PWA72490 | 5220-01-485-9574 | Gage, Ring, Master Setting | Special Features: Setmaster-no 3 bearing air seal, forward snap diameter; used to pre-set PWA72504 gage to zero prior to use; also used for to verify the integrity of the hydraulic chuck detail of PWA72489 machining fixture during set up; inner diameter: 5.60125 in; tolerance: plus 0.00025 in; ov dia 8.0 in; ht 1.5 in; wt 2 lbs END Item Identification: F100-PW-229 Supplementary Features: Serd 9188 | United Technologies Corporation (77445) | |
| PWA72491 | 5220-01-485-8296 | Gage, Profile | Special Features: Gage is stored in A wooden container when not in use, setmaster are required to preset dial bore gages to zeroprior to each use, required calibrationevery 18 months Supplementary Features: Serd 9189 | United Technologies Corporation (77445) | |
| PWA72492 | 5220-01-485-8018 | Gage, Profile | Special Features: Gage, bore-no. 3 bearing air seal, rear snap diameter (5.6500) used to position, hold, and round up air seals to provide concentricity and flatness during machining of plasma coated surfaces END Item Identification: F100-PW-229 Gage Type: Acceptance check | United Technologies Corporation (77445) | |
| PWA72497 | 5220-01-485-7995 | Gage, Ring, Master Setting | Special Features: Used to verify id gage PWA72498 for diameter setting of 7.080, used on F100/200/220/22E engines Supplementary Features: Serd 9195 | United Technologies Corporation (77445) | |
| PWA72498 | 5220-01-486-6388 | Gage, Profile | Special Features: Gage, indicator-no 3 bearing air seal, middle knife edge; used to measure the diameter of the middle knife edge to 7.080 in; ln 12.0 in; wd 3.0 in; ht 3.0 in; wt 10.0 lbs END Item Identification: F100-PW-229 Supplementary Features: Serd 9196 | United Technologies Corporation (77445) | |
| PWA72546 | 5220-01-485-7997 | Gage, Ring, Master Setting | United Technologies Corporation (77445) |