Inspection Gages and Precision Layout Tools: PG135-1, PG7070, PWA102282
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| PG135-1 PG1351 | 5220-01-395-6451 | Gage, Crimping Tool | Souriau USA Inc. (09922) | ||
| PG136-1 PG1361 | 5220-01-395-6452 | Gage, Crimping Tool | Souriau USA Inc. (09922) | ||
| PG137-1 PG1371 | 5220-01-395-6456 | Gage, Crimping Tool | Souriau USA Inc. (09922) | ||
| PG231-1 PG2311 | 5220-01-257-0332 | Gage, Crimping Tool | Souriau USA Inc. (09922) | ||
| PG-400 PG400 | 5220-01-140-2064 | Gage, Ring, Master Setting | Special Features: Wgage setting fixture;range 0.090 in. to 1.500 in. PORMO.000025 in. of nominal reading over the entire range of the instrument, included in the item is A carrying case W/A master calibrating ring traceable to the bureau of standards | Sunnen Products Company (58436) | |
| PG7070 | 5220-00-520-0206 | Spindle, Air Probe | END Item Identification: Precisionaire air gage, fsn 5220-948-4757 | Hamilton Sundstrand Corporation (99167) | |
| PG7087 | 5220-00-685-0540 | Gage, Ring, Plain | Gage Type: Not go Design Type: Single Gaging Surface Inside Diameter: 0.3540 inches | Sundstrand Corp. (58417) | |
| PG7089 | 5220-00-685-0539 | Gage, Ring, Plain | Gage Type: Not go Design Type: Single Gaging Surface Inside Diameter: 0.35895 inches | Sundstrand Corp. (58417) | |
| PGS-1 PGS1 | 5220-01-274-9634 | Gage, Plug, Plain Cylindrical | Special Features: Consists of one set of eight, used in the calibration of V-anvil micrometers, nominal sizes of these plug gages are 0.3150, 0.5250, 0.6050, 0.9200, 1.3150, 1.5250, 1.6050, and 1.9200 inches | Monnier Machinery LLC (2B369) | |
| PL600371 ITEM 84 PL600371ITEM84 | 5220-01-452-9143 | Plate, Surface | END Item Identification: Seawolf | Henley Marine Inc. (20227) | |
| PLANEKAT0R24INCH | 5220-00-873-6682 | Gage, Profile | Special Features: Surface plate check | Rahn Granite Surface Plate Co. (94182) | |
| PLM 600-2 PLM6002 | 5220-01-614-6856 | Gage, Comparator, Electronic | Special Features: 5 adjustable axes 55 lb load capacity 65.35X44.88X27.56 Part Name Assigned BY Controlling Agency: Precimar plm 600-2 | Mahr Federal Inc. (21938) | |
| PMS81585 | 5220-01-222-8346 | Gage, Master Plug, Taper Pipe Thre | Special Features: Thread analyzer;used to ascertain that threads W/pitches of 8, 10, 11, 12, 13, 14, 16, 18, 20 and 24 and diam. from 2.500 through 20.000 in. meet the rqrs of MIL-S-8879A, MIL-S-7742B and MIL-HDBK-H-28;CONSISTS of indicating gages, body adapters, studs, functional rolls, plate master and setting masters | Johnson Gage Company, The (74979) | |
| PMS81586 | 5220-01-222-8347 | Gage, Master Plug, Taper Pipe Thre | Special Features: Thread analyzer;used to ascertain that threads W/pitches of 8, 10, 11, 12, 13, 14, 16, 18, 20 and 24 and diam. from 1.750 through 20.000 in. meet the rqrs of MIL-S-8879A, MIL-S-7742B and mil-hdbk H-28;CONSISTS of indicating gages, body adapters, studs, functional rolls, plate master and setting masters | Johnson Gage Company, The (74979) | |
| PSV-200 PSV200 | 5220-01-237-4465 | Gage, Comparator, Electronic | Special Features: Used to set A wide range of machine tooling; C/O A vertical rotating presetting spindle with integral no. 50 taper mounted in A cast iron base, arranged with A vertical and horizontal slideway equipped with fine adjust hand wheels and electrical unclamping for rapid adjustment | Devlieg Bullard II Inc. (1R4E4) Devlieg Inc. (17455) | |
| PWA10163 | 5220-00-588-6003 | Gage, Profile | United Technologies Corporation (77445) | ||
| PWA10180 | 5220-00-588-6004 | Gage, Profile | Special Features: Gage, turbine blade | United Technologies Corporation (77445) | |
| PWA10219 | 5220-00-592-9664 | Gage, Profile | Special Features: 6ADAPTER assembly-ball bearing flushness;item consists of 1 frame insert, 1 plate, 8 soc hd cap screws, 1 holder, 1 jam nut, 1 adjusting nut, 1 socset screw, 1 soc set screw, 3 soc SCREWS1 nut, 1 soc set screw, 1 adapter, 1 bracket assy, 1 box assy | United Technologies Corporation (77445) | |
| PWA10222 | 5220-00-592-9663 | Gage, Profile | Special Features: Gage, compressor dri | United Technologies Corporation (77445) | |
| PWA102282 | 5220-01-490-7174 | Gage, Profile | Special Features: Replaces 5220-01-279-3988 END Item Identification: C-17ACFT | United Technologies Corporation (77445) |