Inspection Gages and Precision Layout Tools: 1775055, 23393, 2402145
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 1775055 | 5220-01-677-2403 | Gage, Firing Pin Protrusion | Part Name Assigned BY Controlling Agency: Firing pin protrusion gage Length: 3.00 inches Thickness: 0.062 inches | ||
| 1775061 | 5220-01-677-1758 | Gage, Headspace | Overall Length: 1.920 inches nominal Overall Diameter: 0.4640 inches nominal Part Name Assigned BY Controlling Agency: 7.62 X 51 (go) headspace gage | ||
| 1775062 | 5220-01-677-2430 | Gage, Headspace | Overall Length: 1.92 inches nominal Overall Diameter: 0.400 inches nominal Part Name Assigned BY Controlling Agency: 7.62 X 51 (no-go) headspace gage | ||
| 1775065 | 5220-01-680-4191 | Gage, Firing Pin Protrusion | |||
| 1775073 | 5220-01-677-0930 | Gage, Profile | Design Type: Single end Gage Type: Not go Gaging Member Outside Diameter: 0.0860 inches | ||
| 18097C-1 18097C1 | 5220-01-682-3196 | Gage, Plug, Plain Cylindrical | Design Type: Single end Part Name Assigned BY Controlling Agency: Bore alignment rod Special Features: Intended for concentricity check prior to firing suppressed on a new platform. the rod most closely represents the bullet flight path and will show any issue of alignment, if present. recommended to verify barrel to adapter to suppressor alignment, for any new build or any previously unshot setup. choose the corresponding rod for your caliber rifle or carbine; precision machine rods for most accurate verification; for validation of set-up prior to first round fired; simply insert rod through the mounted suppressor of an unloaded weapon. equal space should be seen between bore of suppressor and centered rod. | Colt Canada Corp. (2C085) | |
| 199367B00 | 5220-01-029-9454 | Gage, Go And Not Go | SPD Electrical Systems Inc. (30086) | ||
| 199866A00 | 5220-01-485-0520 | Gage, Profile | SPD Electrical Systems Inc. (30086) | ||
| 1N545130243 | 5220-01-456-4863 | Gap Inspection Gage | Special Features: Fitting size 16 millimeters | Whitehead Alenia Sistemi Subacquei (A2309) | |
| 1N545130244 | 5220-01-209-6863 | Gage, Gap Inspection | General Characteristics Item Description: 0.500 in. tube fitting | Whitehead Alenia Sistemi Subacquei (A2309) | |
| 2058522T | 5220-01-678-5707 | Gage, Profile | Axletech International Inc. (3D6E9) | ||
| 2064282 | 5220-01-576-6274 | Gage, Comparator, Air | End Item Identification: Gage set, aircraft | Mahr Federal Inc. (21938) | |
| 2121606 | 5220-01-689-2234 | Gage, Comparator, Electronic | End Item Identification: Helicopter, gage kit Design Type: Single end Part Name Assigned BY Controlling Agency: Gage, comparator, electronic | Mahr Federal Inc. (21938) | |
| 2191800 | 5220-01-372-6014 | Gage, Comparator, Electronic | Design Type: Single end | Mahr Federal Inc. (21938) | |
| 23055A002 | 5220-01-682-7361 | Gage, Profile | Gage Type: Combination go not go Part Name Assigned BY Controlling Agency: Go plug Special Features: Class z plug | (0KVE6) | |
| 23392 | 5220-01-683-0523 | Gage, Plug, Plain Cylindrical | Part Name Assigned BY Controlling Agency: 5.56 rifle gage, rod | ||
| 23393 | 5220-01-683-0524 | Gage, Plug, Plain Cylindrical | Part Name Assigned BY Controlling Agency: 5.56 bore gage, rod | ||
| 23399 | 5220-01-683-0526 | Gage, Plug, Plain Cylindrical | Part Name Assigned BY Controlling Agency: .338 rifle gage, rod | ||
| 23400 | 5220-01-683-0527 | Gage, Plug, Plain Cylindrical | Part Name Assigned BY Controlling Agency: .338 bore gage, rod | ||
| 2402145 | 5220-01-674-2949 | Gage, Firing Pin Protrusion | Part Name Assigned BY Controlling Agency: Gage, firing pin protrusion |