Inspection Gages and Precision Layout Tools: 152D5256, 154B, 156011
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 152D5256 | 5220-01-289-6319 | Fixture, Calibration | General Dynamics Armament And (05606) | ||
| 152D5797 | 5220-01-250-6873 | Gage, Profile | Special Features: Gage, feeder mounting;used to check feeeder mounting lugs on M61A1 gun housing;consists of housing, P/N 15205797-1, bushing per ansi B94.33, P/N P26-6, handle, gage, P/N CL3GHS, pin, P/N 152D5797-4, bushing, 3W244 | General Dynamics Armament And (05606) | |
| 1-5320XXX 15320XXX | 5220-00-408-0328 | Gage, Ring, Master Setting | Gaging Surface Inside Diameter: 1.5320 inches Gaging Surface Inside Diameter Tolerance: -0.000010/+0.000010 inches | Mahr Federal Inc. (21938) | |
| 154 | 5220-00-517-6065 | Parallel | Design Type: Adjustable bar Overall Length: 3.000 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 1-5400X 15400X | 5220-00-099-9360 | Gage, Disk, Master Setting | Gaging Surface Outside Diameter: 1.5400 inches Gaging Surface Outside Diameter Tolerance: -0.000040/+0.000040 inches | Mahr Federal Inc. (21938) | |
| 1.5400XDISC 15400XDISC | 5220-00-099-9360 | Gage, Disk, Master Setting | Gaging Surface Outside Diameter: 1.5400 inches Gaging Surface Outside Diameter Tolerance: -0.000040/+0.000040 inches | Mahr Federal Inc. (21938) | |
| 15427 | 5220-00-213-0186 | Gage, Seat | Ashcroft Inc. (38056) Dresser Inc. (16497) | ||
| 15428 | 5220-00-213-0201 | Gage, Pilot Valve | Ashcroft Inc. (38056) | ||
| 15429 | 5220-00-213-0197 | Gage, Actuator Seat | Ashcroft Inc. (38056) | ||
| 15430 | 5220-00-213-0207 | Gage, Actuator Feath | Ashcroft Inc. (38056) Dresser Inc. (16497) | ||
| 15431 | 5220-00-213-0195 | GAGE | Ashcroft Inc. (38056) Dresser Inc. (16497) | ||
| 154-4 1544 | 5220-01-542-9107 | Parallel | Special Features: Setof 4 parallels, sizes A, B, C, d;range from 0.375 to 2.250 INCHES;ADJUSTABLE;0.281 inches thick | The L S Starrett Company (57163) | |
| 1.5-4.5 MILS 1545MILS | 5220-01-467-9310 | Tape, Surface Profile | Special Features: 9TEST area 0.375 in. dia; measures 1.5 to 4.5 mils (35 to 115 microns); accuracy and reproducibility of 0.8 mil (18 microns) at profile of 2.0 mils (50 microns) and 1.5 mils (37 microns) at profile of 4.0 mils (100 microns); complies with astm D-4417 General Characteristics Item Description: Layer of 2.6 mils (65 microns) thickness of crushable plastic microfoam coated onto polyester film 2.0 mils (50 microns) of highly uniform thickness Functional Description: Used to provide A permanent profile record of grit or shot blasted surface | Testex Inc. (75082) | |
| 154A | 5220-00-266-8971 | Parallel | Design Type: Adjustable bar Overall Length: 1.750 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 154B | 5220-00-528-2229 | Parallel | Design Type: Adjustable bar Overall Length: 2.125 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 154C | 5220-00-266-8972 | Parallel | Design Type: Adjustable bar Overall Length: 2.688 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 154D | 5220-00-517-6071 | Parallel | Design Type: Adjustable bar Overall Length: 3.563 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 154E | 5220-00-266-8974 | Parallel | Design Type: Adjustable bar Overall Length: 4.188 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 154F | 5220-00-517-6064 | Parallel | Design Type: Adjustable bar Overall Length: 5.063 inches nominal Material: Steel | The L S Starrett Company (57163) | |
| 156011 | 5220-00-784-0316 | Tape Gauge | END Item Identification: Used on schedule A equipment | American Telephone and Telegraph Co. (64959) Bosch Rexroth GMBH Lohmann (D9182) Telemechanics Inc. (57712) |