Inspection Gages and Precision Layout Tools: 0850620, 122561-1, 141190000
| MFG SKU | NSN | Item Name | Details | Manufacturer (CAGE) | RFQ |
|---|---|---|---|---|---|
| 0850620 | 5220-01-666-4055 | Square, Surface Plate | Overall Height: 3.375 inches nominal Overall Width: 3.375 inches nominal Overall Thickness: 0.625 inches nominal | Fastenal Company (1UJL8) | |
| 10-259 10259 | 5220-01-665-9758 | Gage, Plug, Plain Cylindrical | Part Name Assigned BY Controlling Agency: 15 inch 5.56MM suppressor alignment gage Special Features: Manufactured from hardened steel that has been ground 0.0002 inch under nominal bore diameter; outside diameter is finely finished and straight to 0.001 inch over its length; | ||
| 10-260 10260 | 5220-01-665-9768 | Gage, Plug, Plain Cylindrical | Part Name Assigned BY Controlling Agency: 17 inch 7.62MM suppressor alignment gage Special Features: Manufactured from hardened steel that has been ground 0.002 inch under nominal bore diameter; | ||
| 1161109 | 5220-01-672-0636 | Gage, Plug, Taper Cylindrical | |||
| 11B5190472 | 5220-01-658-3513 | Parallel | III End Item Identification: Tools Design Type: Straight bar Part Name Assigned BY Controlling Agency: Steel parallel set | Edgewood Chemical Biological Center (5B5M3) | |
| 12-01870 1201870 | 5220-01-669-2632 | Gage, Profile | Part Name Assigned BY Controlling Agency: 6 inch contour gage Special Features: 35 ultra-thin leaves per inch; capable of duplicating surfaces up to 3.5 inches deep; | ||
| 122561-1 1225611 | 5220-01-661-9520 | Anvil, Measuring | Overall Length: 1.95 inches nominal Overall Height: 0.687 inches nominal Overall Width: 0.540 inches nominal | ADC Telecommunications Inc. (00144) | |
| 123-6915 1236915 | 5220-01-661-4374 | Plate, Angle, Solid | Part Name Assigned BY Controlling Agency: Plate | Caterpillar Inc. (11083) | |
| 13069065 | 5220-01-672-3401 | Gage, Headspace | U S Army Armament Research (19200) | ||
| 130B-38AF 130B38AF | 5220-01-491-8613 | Gage, Comparator, Electronic | End Item Identification: Af metcal; ground support equipment Special Features: Computerized version of model 130B-24; provides solid state electronic surveillance and calibration of gage blocks; system contains a solid state amplifier and gage block comparator; digital readout meter has a range of porm 199.9U in, porm 5U meter, and minimum digit value of 0.1U in, 0.01U meter;stepping switches allow a series of gage blocks to be gaged without mechanical adjustment; computer and sofware included Supplementary Features: Consists of 61971 WVAJ2 depth gage, digital; 1475T electronic weigh scale; 1001678 dynamometer; 2 inch optical flat; 130B-38AF gage block compartor system 130B-24 gage block comparator | Mahr Federal Inc. (21938) | |
| 136B-5 136B5 | 5220-01-666-6360 | Gage, Comparator, Electronic | Part Name Assigned BY Controlling Agency: Comparator ring gage Special Features: Manual 000005 graduations range | Mahr Federal Inc. (21938) | |
| 14008B1012 | 5220-01-666-3988 | Plate, Surface | III End Item Identification: 01-615-9020 Surface Length: 90.00 inches nominal Working Surface Quantity: 1 | ||
| 14008B1013 | 5220-01-666-4064 | Plate, Surface | |||
| 14008C0012 | 5220-01-666-6840 | Plate, Surface | Surface Length: 18.000 inches nominal Surface Width: 18.000 inches nominal Working Surface Finish: Galvanized | ||
| 141100000 | 5220-01-667-8848 | Gage, Profile | Gage Type: GO Gaging Member Outside Diameter: 1.0 inches Part Name Assigned BY Controlling Agency: Plug gage, class X | ||
| 141109300 | 5220-01-667-8927 | Gage, Profile | Gage Type: GO Gaging Member Outside Diameter: 0.093 inches Part Name Assigned BY Controlling Agency: Plug gage, class X | ||
| 141125000 | 5220-01-667-8841 | Gage, Profile | Gage Type: GO Gaging Member Outside Diameter: 0.25000 inches Part Name Assigned BY Controlling Agency: Plug gage, class X | ||
| 141150000 | 5220-01-667-8845 | Gage, Profile | Gage Type: GO Gaging Member Outside Diameter: 0.50000 inches Part Name Assigned BY Controlling Agency: Plug gage, class X | ||
| 141175000 | 5220-01-667-8931 | Gage, Profile | Gage Type: GO Gaging Member Outside Diameter: 0.75 inches Part Name Assigned BY Controlling Agency: Plug gage, class X | ||
| 141190000 | 5220-01-667-8835 | Gage, Profile | Gage Type: GO Gaging Member Outside Diameter: 0.90000 inches Part Name Assigned BY Controlling Agency: Plug gage, tool steel |