FSC 5280 Sets, Kits, and Outfits of Measuring Tools: 5280-01-505-8509, 5280-01-525-9294, 5280-01-560-1762

Get a Quote

 
NSNMFG SKUItem NameDetailsManufacturer (CAGE)RFQ
5280-01-505-8509
5280015058509
6V7926Gage set, InspectionSpecial Features: Diagnostic measuring tools; used primarily for off-engine timing dimensions when setting fuel pump lifters; part numbers: 6V-3073 box assembly; 6V-7029 liner block; 6V-7924 holder block; 8S-3158 indicator; 3P-1565 collet clamp; 5P-4156 base; 5P-4163 contact point, 120.65MM (4.75 in) long; 5P-4162 contact point, 95.25MM (3.75 in) long; 5P-4161 contact point, 69.85MM (2.75 in) long; 3S-3270 contact point, 44.45MM (1.75 in ) long; 5P-4160 contact point, 19.05MM (.75 in) long; 5P-4159 gauge stand; 5P-4158 gauge, 50.8MM (2 in); 5P-4157 gauge, 101.6MM (4 in)
END Item Identification: 2410012532118; tractor, full track
Component Quantity: 12
Caterpillar Inc. (11083)

Quote

5280-01-506-3163
5280015063163
7-562128001-601Nut Retaining kitBoeing Company,, The (8V613)

Quote

5280-01-507-8414
5280015078414
J 43922
3HA637
Rule set, NonfoldingSPX Corporation (33287)
Oshkosh Corporation (45152)

Quote

5280-01-514-9421
5280015149421
2870708Kit-HitchEND Item Identification: Rack and tunnel extension; widetrak lx S01SU4BS and european widetrak lx E01SU4BU
Polaris Industries Inc. (1RE78)

Quote

5280-01-516-6403
5280015166403
PWA72852Gage set, InspectionSpecial Features: PWA72852 fixture consists of A circular steel base plate andattached upright support ring.the upper inner diameter of the support ring contain (2) machined steps that are used to locateand clamp details of the outer flange of either part number 4065651 front (upper step) or P/N 4065652 rear (lower step) number 4 bearing seal support. adetail height cage comes with fixture.serd number 9679
END Item Identification: Gage, inspection-pin perpendicularity
United Technologies Corporation (77445)

Quote

5280-01-517-9597
5280015179597
EB2G1309Gage set, InspectionSpecial Features: Triangular shaped hole in gauge identifies eddie-bolt 2 usage
Part Name Assigned BY Controlling Agency: Eddie-bolt 2 gauge set lightweight pin protrusion
Unpackaged Unit Length: 0.880 inches nominal
Alcoa Global Fasteners Inc. (92215)

Quote

5280-01-517-9984
5280015179984
PWA500384Gage set, InspectionUnited Technologies Corporation (77445)

Quote

5280-01-521-1953
5280015211953
2C90562G01Gage set, InspectionEND Item Identification: CT7 aircraft engine
Part Name Assigned BY Controlling Agency: Gage set
General Electric Company (07482)

Quote

5280-01-525-8351
5280015258351
PWA500521Gage set, InspectionUnited Technologies Corporation (77445)

Quote

5280-01-525-9294
5280015259294
PWA500519Gage set, InspectionUnited Technologies Corporation (77445)

Quote

5280-01-528-3680
5280015283680
ASSY 80010Survey kitSpecial Features: Survey kit also includes niins - 8415-LL-LCC-0770, 4; 8465-00-926-4932, 2; 9905-00-684-4646, 1; 9905-01-458-2057, 1; 9905-LL-LCC-1859, 12; 9905-LL-LCC-1860, 1; 9905-LL-LCC-1861, 1; 9905-LL-LCC-1862, 1; 9905-LL-LCC-2700, 12. assembly weighs 319.110 lbs and is 22.730 cubic ft.
END Item Identification: Apl update
Part Name Assigned BY Controlling Agency: Survey kit
Naval Construction Battalion Center (07071)

Quote

5280-01-534-2651
5280015342651
465-5035Gage, ErosionAlliant Techsystems Operations LLC (1YQE8)

Quote

5280-01-534-2657
5280015342657
80934/0200.00Gage, ErosionDTI Associates Inc. (0D0S3)

Quote

5280-01-536-9019
5280015369019
SPNCASECase, Measuring Tool set and OutfSpecial Features: 24 lbs.
END Item Identification: Spincon 45010 advanced air sampler
Evogen Inc. (3B9L9)

Quote

5280-01-537-2790
5280015372790
6961847Measuring Tool set, Machinist'sComponent Quantity: 266
Component Document Origin: Government
Document Type: Engineering drawing
Naval Sea Systems Command (53711)

Quote

5280-01-541-3998
5280015413998
6398949068
701.231.012
InstrumentAlnor Instrument Company (01518)

Quote

5280-01-552-9375
5280015529375
MT337BGage set, Pressure, Fuel InjectionGeneral Characteristics Item Description: Large dual scale gage with 0 to 100 psi in 1 psi increments and 0 to 700 kpa in 10 kpa increments; test adapter for ford vehicles; test adapter for gm and chrysler vehicles; can also be used for some imports; includes gage and boot assembly, hose assembly with quick coupler and barbed fitting, O-ring and valve core package and plastic box
Functional Description: Used to perform fuel pressure tests on fuel injected vehicles with schrader type test ports
Idsc Holdings LLC (55719)

Quote

5280-01-556-8022
5280015568022
3M430
CEN-3M430
Gage set, InspectionSpecial Features: Digital rotor/brake gauge; range 0 to 5.500 in; graduations 0.0005 in; includes storage case; 3.250 in reach, W/pointed anvil; digital display W/direct inc/metric conversion; measures brake rotors/ball joints for inspection before replacement or training
Central Tools Inc. (11299)

Quote

5280-01-559-3376
5280015593376
ARKIT-95Gage kit, Small Arms, Armorer'sBarrett Firearms Mfg, Inc. (0BT64)

Quote

5280-01-560-1762
5280015601762
12901228Gage set, Cannon Bore ErosionUS Army Benet Laboratories (1NUW7)

Quote

  • We solve sourcing challenges for 5280-01-505-8509, 5280-01-514-9421, 5280-01-517-9597, 5280-01-521-1953, 5280-01-525-8351, 5280-01-528-3680, 5280-01-536-9019, 5280-01-537-2790, 5280-01-556-8022, 5280-01-560-1762 - NSN parts, hard to find, long lead time and obsolete components.